Joomla Templates Club 406,261 posts

[jimcapraro Friend jimcapraroJoin date: September 2008Posts: 109Downloads:8Uploads:2 Thanks: 22 Thanked: 4 times in 1 posts]

#725760

I’m building this site and it’s coming along quite nicely. Once problem I can’t solve is trying to put a facebook feed in two tile positions stacked vertically. If you go to http://northrivercommission/nrc2/ you will see that in grid position 4 I’ve placed a facebook feed. I would like it to expand to display in positions 4 and 8. If I change the grid parameter to 1×2 it makes no difference.

I’ve also tried changed the physical height of the facebook feed iframe to 585 while the grid i set to 1×2 but it has no effect.

Can this be done?

[Ninja Lead Moderator Ninja LeadJoin date: November 2014Posts: 16064Downloads:310Uploads:2864 Thanks: 341 Thanked: 3854 times in 3563 posts]

#755468

Hi,

I could not access your site with provided URL in this thread, kindly check and PM me again.

Regards

[jimcapraro Friend jimcapraroJoin date: September 2008Posts: 109Downloads:8Uploads:2 Thanks: 22 Thanked: 4 times in 1 posts]

#756494

this should work: http://northrivercommission.org/nrc2/

[Ninja Lead Moderator Ninja LeadJoin date: November 2014Posts: 16064Downloads:310Uploads:2864 Thanks: 341 Thanked: 3854 times in 3563 posts]

#756516

<em>@jimcapraro 503699 wrote:</em><blockquote>this should work: http://northrivercommission.org/nrc2/</blockquote>

This is setting with 1×2 (grid-1×2). I set it into Facebook module, see the screenshot

and now, you can see it’s working on front-end site

1 user says Thank You to Ninja Lead for this useful post

1. jimcapraro

[jimcapraro Friend jimcapraroJoin date: September 2008Posts: 109Downloads:8Uploads:2 Thanks: 22 Thanked: 4 times in 1 posts]

#756541

Ninja Lead – Thanks – this is exactly what I wanted.

But here’s something strange – last Saturday I did the same exact thing several times and it wouldn’t work – I cleared my browser cache and it wouldn’t work. But I think you must have the magic touch!

Just now I tried changing the height of the module to three verticle tiles with a setting of: grid-1×3. It didn’t work and instead only shows the facebook tile as 1×1. But, thankfully, when I set the tile dimension back to 1×2 it worked.

[Author]

Posts